Hope this is in the right place
#1
New Member
Thread Starter
Join Date: Dec 2009
Posts: 7

I have a 1995 4door, and I need to replace the front bumper, valance, and side bumpers. I need to know the best way to do this: should I just go to the parts store and order new ones, or try a salvage yard, or is there something else I should do that is better. Thank you in advance!
#2
Salvage yard wld be cheaper they might have a little bit of rust just grind it off...
#3
New Member
Thread Starter
Join Date: Dec 2009
Posts: 7

Don't know who moved it, but thank you and sorry for posting in the wrong section.
#4
junk yard by far, however I have to say ( I learned this the hard way) be really careful when removing/installing the bumper ends the clip on the back is not that great lol
#5
x3 j/y. yo will pay the same price for all three of those parts as one unpainted fender would run you shipped. BONUS: you can color match
#6
def. go to the junk yard. i noticed you are also in colorado here is the site i use to browse all the junkyards around me. http://www.car-part.com/
also boot hill truck in denver is great, a guy named tony up there makes great deals. i just bought a new tailgate off him with wheel carrier for $75 had no damage other then a samll rust spot that i just buffed out.
PM me if you need any help with local stuff.
also boot hill truck in denver is great, a guy named tony up there makes great deals. i just bought a new tailgate off him with wheel carrier for $75 had no damage other then a samll rust spot that i just buffed out.
PM me if you need any help with local stuff.
#7
New Member
Thread Starter
Join Date: Dec 2009
Posts: 7

Around the Denver area, so thanks. And thank you all for the suggestions. I will decide here soon as to the way I decide to go.
Thread
Thread Starter
Forum
Replies
Last Post
1sttimejimmyowner
Website Problems and Suggestions
2
11-05-2012 10:11 AM







