2nd Gen torsion bar bolt specs?
BF Veteran
Joined: May 2007
Posts: 2,713
From: Chicago, IL
GMFS has a great torsion bar write-up (linked below) but I'm not positive if the bolt/keys on our trucks are the same as fullsize. According to their write-up, the bolt is M12 1.75x60
You can check the usual hardware stores but I had a hard time finding any M12 bolts for a recent project and most that I found were a 1.25 thread pitch. I'm sure a dealer would have them
GM Torsion Bar 401
You can check the usual hardware stores but I had a hard time finding any M12 bolts for a recent project and most that I found were a 1.25 thread pitch. I'm sure a dealer would have them
GM Torsion Bar 401
Last edited by mdehoogh; Apr 4, 2011 at 10:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
20injimmy
2nd Generation S-series (1995-2005) Tech
7
Apr 27, 2008 02:02 PM
