95' S-10 No 4x4!! Sounds like it wants to engauge??
#1
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
I have a 95' s10 that is giving me issues on the 4x4.
When the buttons are pushed it sounds like the actuator is engaging but no 4 wheel, then when I put it into 4 low the transfer case engages but the front diff is not engaged and again no 4 wheel.
The transfer case engages in both 4 High & Low but no Front Diff.
Thanks In Advance Guys/Gals!!
When the buttons are pushed it sounds like the actuator is engaging but no 4 wheel, then when I put it into 4 low the transfer case engages but the front diff is not engaged and again no 4 wheel.
The transfer case engages in both 4 High & Low but no Front Diff.
Thanks In Advance Guys/Gals!!
![Icon Omg](https://blazerforum.com/forum/images/smilies/icon_omg.gif)
#2
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
Doing a little searching on this site will yield TONS of info on your issue. Here are a couple of good places to start looking
Tech articles index
4X4 No worky tech article
This is most likely a vacuum issue with your front axle actuator
Tech articles index
4X4 No worky tech article
This is most likely a vacuum issue with your front axle actuator
Thread
Thread Starter
Forum
Replies
Last Post
metalhead
Steering, Suspension & Drivetrain
9
04-25-2007 09:26 PM
napalm dan
2nd Generation S-series (1995-2005) Tech
2
04-17-2007 12:53 AM