how to install kyb gr2 shocks front,rear
Senior Member
Joined: Nov 2007
Posts: 611
From: Ottawa, Canada
unbolt old shock. Bolt new ones in...
sorry, had too...lol
The front ones have 2 bolts, 1 at the top, 1 at the bottom. Remove them (I think 18mm socket and wrench to remove) slide the shock out the bottom, and slide new one in...
Rear have 2 bolts at the top (13mm I think), and a nut at the bottom thats attached to the axle.
sorry, had too...lol
The front ones have 2 bolts, 1 at the top, 1 at the bottom. Remove them (I think 18mm socket and wrench to remove) slide the shock out the bottom, and slide new one in...
Rear have 2 bolts at the top (13mm I think), and a nut at the bottom thats attached to the axle.
Thread
Thread Starter
Forum
Replies
Last Post
Major Tom
Steering, Suspension & Drivetrain
1
May 31, 2012 02:38 PM
