Suspension Sqeak/Noise
I have a squeak in the rear suspension, and upon inspection I saw that the rubber bushings for the sway bar are rotten and cracked. I'll probably be buying a polyurethane bushing kit in the near future.
I'd suggest you start by greasing the front ball joints and anything else with a grease fitting, look at the sway bar links, etc.
I'd suggest you start by greasing the front ball joints and anything else with a grease fitting, look at the sway bar links, etc.
I thought it was my lower control arm bushings replaced them. Still did it, Thought it was my shocks because the rubber around the top that connects to the truck was worn but that still wasent it, It was the one ball joint that when I got the truck was sealed and wouldent let me grease it. That ball joing was so shot, dried and rusted inside, almost pops out of its joint it was horrible, I replaced it with moog and all good. Also replaced my sway bar links they were dry rotting.
Thread
Thread Starter
Forum
Replies
Last Post
Dropdblzr2000
2nd Generation S-series (1995-2005) Tech
5
May 12, 2008 11:01 AM
cimbali
General Tech Help
1
Jun 30, 2006 05:07 PM







