What to look for in 4wd problem
Thread Starter
|
New Member
Joined: Jun 2013
Posts: 77
From: Grandview, MO
What to look for in 4wd problem
I have a 99 2door 4x4 with 3.42 no locker
2WD and 4Hi work fine, but nothing happens when I go to 4Lo. Light just blinks in Neutral.
From my research, I have the N233. I've checked the actuator under the battery, and with 4Hi working, I have good vacuum and a good actuator.
I have not looked at the switch in the T-Case. If the switch is bad, which switch do I buy? Dorman doesn't give specifics on their website. I need a correct part number. Also, what else could it be that makes 4Lo not work?
Looking to go wheeling in 2 weeks, so need to get this issue fixed quickly (and cheap) lol.
2WD and 4Hi work fine, but nothing happens when I go to 4Lo. Light just blinks in Neutral.
From my research, I have the N233. I've checked the actuator under the battery, and with 4Hi working, I have good vacuum and a good actuator.
I have not looked at the switch in the T-Case. If the switch is bad, which switch do I buy? Dorman doesn't give specifics on their website. I need a correct part number. Also, what else could it be that makes 4Lo not work?
Looking to go wheeling in 2 weeks, so need to get this issue fixed quickly (and cheap) lol.
BF Guru
Joined: Oct 2010
Posts: 5,962
From: Summit Ny
Thread
Thread Starter
Forum
Replies
Last Post
waterskier98
Steering, Suspension & Drivetrain
5
Mar 4, 2009 03:15 PM
