Hey i got coil springs off a 2003 s10 extreme and put them on my 2000 blazer and there is not a hight diffrence. Is there one at all or does the body kit and the diffrent rims and tires make it look at sit a lil lower????

 

it is 2 or 3 inches lower. I think it is the spindles that lower it.
chris

 

I has 2 inch drop coils and a 1 inch drop spindle. Be sure the coils are all the way in the mounts.

 

can i swap the spindles????its a diffrent set up, mine on my 2000 are sealed and everything no dust cap or anything, just 3 bolts holding the hub onto the spindle. But the spindle and hub i got off the 2003 have the dust cover with non sealed bearing and a completly diffrent rotor, well the rotor looks diffrent, not sure if it is thicker or anything. Is it ok to switch it over???

 

i will post come pictures of it in a little bit

 

here are the ones that r on my truck now

 

here is what i want to put on it, note they r off of a 2003 s10 pick up and i have a 2000 s10 blazer, but i dont think that it makes a diffrence

 

You would have to use EVERYTHING from the 2003. Just make sure that the brake line is the same style (which I think it is). The area where you are probably going to run into issues is if they changed the front wheel speed sensor design between '00 & '03. If they did, then you are in for some fun! If not, you should be able to use the control arms out. Check to make sure that the control arms line up properly and start throwing it together.