93 blazer dies when warmed up
My 93 blazer runs fine until it gets warms up then it stalls or skips a bit then dies it will restart but then dies again any ideas to what would be causing this to happen any ideas are greatly appreciated...
Maybe the same issue?
Does somebody have an idea on how to isolate this issue. I have no time at the moment to dig into the schematics and figure if we could measure the output signal of the crank position sensor.
Check this: https://blazerforum.com/forum/1st-ge...hen-hot-88349/
Does somebody have an idea on how to isolate this issue. I have no time at the moment to dig into the schematics and figure if we could measure the output signal of the crank position sensor.
Check this: https://blazerforum.com/forum/1st-ge...hen-hot-88349/
Thread
Thread Starter
Forum
Replies
Last Post
PseudoKirby
2nd Generation S-series (1995-2005) Tech
9
Oct 10, 2011 09:41 AM
KK808
Engine & Transmission
3
Mar 2, 2009 01:44 PM
Poligono
2nd Generation S-series (1995-2005) Tech
5
Nov 3, 2008 06:01 PM




