1st Generation S-series (1983-1994) Tech Discuss 1st generation S-series (1983-1994) general tech topics here.

94 s10 blazer Floor Vent Problem

Thread Tools
 
Search this Thread
 
  #1  
Old 08-14-2012 | 08:56 PM
Sam Ford's Avatar
Thread Starter
|
Beginning Member
Joined: Aug 2012
Posts: 16
Sam Ford is on a distinguished road
Default 94 s10 blazer Floor Vent Problem

My 1994 S10 Blazer 4x4 air flow dosent come out of the vents only the floor and defrost! Ive repaired the vacum lines and am stuck! What do i check now??
 

Last edited by Sam Ford; 08-14-2012 at 09:02 PM.
  #2  
Old 08-14-2012 | 11:10 PM
Rottidog's Avatar
BF Veteran
Joined: Sep 2008
Posts: 2,522
From: Winnipeg, Manitoba
Rottidog has a spectacular aura aboutRottidog has a spectacular aura about
Default

Still sounds like a vacuum leak, that or the door actuator.
Search in here & you'll probably find the answers or at least a good lead.
 
  #3  
Old 08-15-2012 | 10:41 AM
Sam Ford's Avatar
Thread Starter
|
Beginning Member
Joined: Aug 2012
Posts: 16
Sam Ford is on a distinguished road
Default

Ty so much!!!!
 
  #4  
Old 08-24-2012 | 06:44 PM
Sam Ford's Avatar
Thread Starter
|
Beginning Member
Joined: Aug 2012
Posts: 16
Sam Ford is on a distinguished road
Default

I just wanna tell ya you were right there was another vac problem and since i fixed it my air is working properly ty so much rottidog!!!!
 
  #5  
Old 08-24-2012 | 09:20 PM
Rottidog's Avatar
BF Veteran
Joined: Sep 2008
Posts: 2,522
From: Winnipeg, Manitoba
Rottidog has a spectacular aura aboutRottidog has a spectacular aura about
Default

Awesome man!
Where was it & you're welcome... just glad I was right & didn't have you fishing in the dark, as it were.
The extra info other than "I found it" etc can be usefull for others with similiar issues.
We all try to help eachother.
 
  #6  
Old 08-26-2012 | 11:41 AM
Sam Ford's Avatar
Thread Starter
|
Beginning Member
Joined: Aug 2012
Posts: 16
Sam Ford is on a distinguished road
Default

It was the vacum port next to the distributor i found it while i was replacing the distributor cap! Its to the left of the distributor if your looking at it from the front! TY again!!!!
 
  #7  
Old 08-26-2012 | 11:51 AM
Rottidog's Avatar
BF Veteran
Joined: Sep 2008
Posts: 2,522
From: Winnipeg, Manitoba
Rottidog has a spectacular aura aboutRottidog has a spectacular aura about
Default

The BIG port. That'll cause a lot of issues. WTG & thanks for posting results for others!
 
  #8  
Old 01-27-2013 | 02:51 AM
Sam Ford's Avatar
Thread Starter
|
Beginning Member
Joined: Aug 2012
Posts: 16
Sam Ford is on a distinguished road
Default 94 s10 blazer 4x4

Ok yall i need help! My blazer still has a rough idle! Ive fixed all the vacume lines and a total tune up! So whats wrong with it now???
 
  #9  
Old 02-02-2013 | 07:47 PM
Sam Ford's Avatar
Thread Starter
|
Beginning Member
Joined: Aug 2012
Posts: 16
Sam Ford is on a distinguished road
Default Rough idle

I have a 94 S10 blazer 4x4 ive done a complete tune up fixed all the vacum lines and it still has a rough idle! But other than that it runs fine! Help please ty??
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tdbone1
2nd Generation S-series (1995-2005) Tech
8
12-31-2012 12:27 PM
gomfrddy
1st Generation S-series (1983-1994) Tech
14
06-11-2011 12:18 AM
contour1
2nd Generation S-series (1995-2005) Tech
8
01-03-2011 04:36 AM
sinnervision
2nd Generation S-series (1995-2005) Tech
2
11-27-2010 08:29 AM
starcruiser
2nd Generation S-series (1995-2005) Tech
6
10-17-2009 10:52 AM



Quick Reply: 94 s10 blazer Floor Vent Problem



All times are GMT -5. The time now is 01:18 PM.