can you jumper the 4hi/4lo connections to bypass switch?
Thread Starter
|
Starting Member
Joined: Sep 2009
Posts: 141
From: Chattanooga, TN USA
can you jumper the 4hi/4lo connections to bypass switch?
Well, I finally was able to reach the TCCM and am getting power to the TCCM. I am getting power to wires that go to the switch on the dash, but there are no lights on the actual switch itself.
There are 5 wires that plug into the switch:
| |
|
| |
The middle wire is hot (12v). So does anyone know how to safely jump the other wires to see if it goes to 4hi or 4lo?
There are 5 wires that plug into the switch:
| |
|
| |
The middle wire is hot (12v). So does anyone know how to safely jump the other wires to see if it goes to 4hi or 4lo?
Thread
Thread Starter
Forum
Replies
Last Post
tilleyvideo
2nd Generation S-series (1995-2005) Tech
3
Aug 5, 2009 08:10 PM
