1st Generation S-series (1983-1994) Tech Discuss 1st generation S-series (1983-1994) general tech topics here.

Fuel filter

Old Mar 13, 2011 | 10:02 AM
  #1  
rob180's Avatar
Thread Starter
|
Beginning Member
Joined: Feb 2011
Posts: 29
From: OHIO
rob180 is on a distinguished road
Default Fuel filter

Did a tune-up on my 94 vortec, plugs cap wires air filter. Still have a little hesitation and sometimes rough idle at a stop light. Is the fuel filter pressurized on this year blazer? My old 87 tbi was, and my manual only covers upto 87. If it is how do I de-pressurize it so I don't take a bath in $3.65 cent a gallon cologne!! Thanks..........
 
Old Mar 13, 2011 | 10:50 AM
  #2  
ffox's Avatar
Starting Member
Joined: Feb 2011
Posts: 134
ffox is on a distinguished road
Default

Yep, it's pressurized. On the rear right side of the intake, where the fuel lines come in is the fitting to check fuel pressure, should have a screw on cap, take that off and press on the little valve core, just like letting air out of a tire.
 
Old Mar 13, 2011 | 11:12 AM
  #3  
ohsofly's Avatar
Super Member
Joined: Jan 2010
Posts: 1,534
From: Camrose AB... Canada
ohsofly will become famous soon enoughohsofly will become famous soon enough
Default

Thats also where you want to screw your furl pressure gauge on and check for leaking off of pressure.
 
Old Mar 13, 2011 | 11:52 AM
  #4  
rob180's Avatar
Thread Starter
|
Beginning Member
Joined: Feb 2011
Posts: 29
From: OHIO
rob180 is on a distinguished road
Default

Outstanding!!!!!!!!!! Thanks alot guys, also good to know that thats where I check for leak off pressure. Should re-pressurise when I turn on the key when its all done then. Thanks alot again!!
 
Old Mar 13, 2011 | 05:11 PM
  #5  
ohsofly's Avatar
Super Member
Joined: Jan 2010
Posts: 1,534
From: Camrose AB... Canada
ohsofly will become famous soon enoughohsofly will become famous soon enough
Default

Yeah just turn the key on and let it buzz up to pressure. It will return the air back to the tank through the return line. When the buzzing stops it should start like normal.

Try blowing through your new filter, and then blow out the old one... You will know if that was your problem or not if it feels like you are going to blow your ears out cause its plugged.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigdaddykane93
2nd Generation S-series (1995-2005) Tech
3
Jun 25, 2012 01:24 AM
95jblaze
2nd Generation S-series (1995-2005) Tech
5
Aug 27, 2011 03:46 PM
brianroark
Engine & Transmission
3
Jun 25, 2010 03:14 PM
Chalz
2nd Generation S-series (1995-2005) Tech
1
Dec 4, 2008 06:11 PM
riverjamie
Engine & Transmission
5
Sep 24, 2007 08:21 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:13 PM.