Hood Latch Problem
#1
10-06-2009 | 10:43 PM
Thread Starter
|
Beginning Member
Joined: Oct 2009
Posts: 34
From: n.west alabama
Hood Latch Problem
I Have a 93 S10 blazer with a very hard to pop hood latch.
The inside handle pull seemed to barely pull it enough to unlatch.
I got the hood up, pulled the cable through the post latch enough to put a small split splacer just above the end of the cable. Essentially making the cable just a bit longer.
Now it works fine.
The inside handle pull seemed to barely pull it enough to unlatch.
I got the hood up, pulled the cable through the post latch enough to put a small split splacer just above the end of the cable. Essentially making the cable just a bit longer.
Now it works fine.
#2
10-07-2009 | 07:58 AM
*Moved to the 1st Gen Tech section*
Thread
Thread Starter
Forum
Replies
Last Post
03RedBLazerXtreme
2nd Generation S-series (1995-2005) Tech
5
09-23-2007 04:31 PM
blazer4x4
2nd Generation S-series (1995-2005) Tech
1
09-12-2007 12:59 PM
