4x4 question
#13
Well, part of the shafts are missing... The outer ends were left on (the actual shaft and CV fittings were taken out).
The original problem, the vacuum actuator was still there, and still engaged... The cable itself was seized up, so I removed it and I'm awaiting my posi lock cable, and new cv shafts. Along with my code reader, exhaust Y pipe and catalytic converter (not necessarily needed, but for good measure, and I got a good deal).
The original problem, the vacuum actuator was still there, and still engaged... The cable itself was seized up, so I removed it and I'm awaiting my posi lock cable, and new cv shafts. Along with my code reader, exhaust Y pipe and catalytic converter (not necessarily needed, but for good measure, and I got a good deal).
Thread
Thread Starter
Forum
Replies
Last Post
Athlon2012
2nd Generation S-series (1995-2005) Tech
3
12-16-2014 11:35 PM
razman
Steering, Suspension & Drivetrain
11
02-22-2009 01:57 PM
tolleyc
2nd Generation S-series (1995-2005) Tech
4
07-29-2007 05:57 PM