Blazer Forum - Chevy Blazer Forums

2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

97 ignition replacement

Thread Tools
 
Search this Thread
 
Old Oct 10, 2010 | 04:29 PM
Share
  #1  
gmbwrenchn's Avatar
Thread Starter
|
Starting Member
Joined: Mar 2008
Posts: 112
From: WI.
gmbwrenchn is an unknown quantity at this point
Default 97 ignition replacement
Any step by step instructions on replacing the ignition in a 97 ? Thanks.
 
Old Oct 10, 2010 | 05:01 PM
Share
  #2  
b1heqh54's Avatar
Junior Member
Joined: Jul 2010
Posts: 364
From: Brantford Ontario Canada
b1heqh54 is on a distinguished road
Default
A somewhat vague question, but here's a shot at it for ya.
 
Attached Files
Old Oct 10, 2010 | 05:07 PM
Share
  #3  
gmbwrenchn's Avatar
Thread Starter
|
Starting Member
Joined: Mar 2008
Posts: 112
From: WI.
gmbwrenchn is an unknown quantity at this point
Default
this pertains to a 97 as well? Thanks.
 
Old Oct 10, 2010 | 05:11 PM
Share
  #4  
b1heqh54's Avatar
Junior Member
Joined: Jul 2010
Posts: 364
From: Brantford Ontario Canada
b1heqh54 is on a distinguished road
Default
...there would be better ways for me to waste time...lol
There are also instructions on replacing the lock cylinder, if that's more of what you're looking for, but I don't know what your problem is: perhaps you meant the ignition coil, there are a lot of ignition parts...
 
Last edited by b1heqh54; Oct 10, 2010 at 05:14 PM.
Old Oct 10, 2010 | 05:25 PM
Share
  #5  
gmbwrenchn's Avatar
Thread Starter
|
Starting Member
Joined: Mar 2008
Posts: 112
From: WI.
gmbwrenchn is an unknown quantity at this point
Default
Where the key goes in
 
Old Oct 10, 2010 | 05:31 PM
Share
  #6  
b1heqh54's Avatar
Junior Member
Joined: Jul 2010
Posts: 364
From: Brantford Ontario Canada
b1heqh54 is on a distinguished road
Default
like this?
 
Attached Files
Old Oct 10, 2010 | 06:16 PM
Share
  #7  
gmbwrenchn's Avatar
Thread Starter
|
Starting Member
Joined: Mar 2008
Posts: 112
From: WI.
gmbwrenchn is an unknown quantity at this point
Default
Bingo.......is there one specifically for a 97'? Thanks.
 
Old Oct 10, 2010 | 06:21 PM
Share
  #8  
b1heqh54's Avatar
Junior Member
Joined: Jul 2010
Posts: 364
From: Brantford Ontario Canada
b1heqh54 is on a distinguished road
Default
...that's the only one I have here, but I'm pretty sure they're the same setup - maybe someone else will confirm it for ya
 
Old Oct 10, 2010 | 06:24 PM
Share
  #9  
gmbwrenchn's Avatar
Thread Starter
|
Starting Member
Joined: Mar 2008
Posts: 112
From: WI.
gmbwrenchn is an unknown quantity at this point
Default
Thanks for the info!
 
Old Oct 10, 2010 | 06:26 PM
Share
  #10  
b1heqh54's Avatar
Junior Member
Joined: Jul 2010
Posts: 364
From: Brantford Ontario Canada
b1heqh54 is on a distinguished road
Default
Thank you for thanking me. Good Luck - let us know how you make out.
 



Advanced Search

All times are GMT -5. The time now is 03:49 PM.