98 blazer rough idle
Thread Starter
|
Beginning Member
Joined: Sep 2024
Posts: 20
Hello, just an update on the situation.
I bought another distributor and fitted today.
All runs much better now and on inspection of the old distributor the plastic rotor cap was loose.
Thanks for your help in looking into this and I have learnt some valuable info on o2 sensors and also fuel trims.
I bought another distributor and fitted today.
All runs much better now and on inspection of the old distributor the plastic rotor cap was loose.
Thanks for your help in looking into this and I have learnt some valuable info on o2 sensors and also fuel trims.
BF Veteran
Joined: Jan 2007
Posts: 4,629
From: Florida
Hello, just an update on the situation.
I bought another distributor and fitted today.
All runs much better now and on inspection of the old distributor the plastic rotor cap was loose.
Thanks for your help in looking into this and I have learnt some valuable info on o2 sensors and also fuel trims.
I bought another distributor and fitted today.
All runs much better now and on inspection of the old distributor the plastic rotor cap was loose.
Thanks for your help in looking into this and I have learnt some valuable info on o2 sensors and also fuel trims.
George
BF Guru
Joined: Dec 2016
Posts: 5,610
From: Moscow, ID
Hello, just an update on the situation.
I bought another distributor and fitted today.
All runs much better now and on inspection of the old distributor the plastic rotor cap was loose.
Thanks for your help in looking into this and I have learnt some valuable info on o2 sensors and also fuel trims.
I bought another distributor and fitted today.
All runs much better now and on inspection of the old distributor the plastic rotor cap was loose.
Thanks for your help in looking into this and I have learnt some valuable info on o2 sensors and also fuel trims.
Thread
Thread Starter
Forum
Replies
Last Post