2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

Blower Motor

Thread Tools
 
Search this Thread
 
  #1  
Old 09-26-2010, 12:38 PM
speterson1011's Avatar
Starting Member
Thread Starter
Join Date: Jul 2007
Location: Brandon,FL
Posts: 216
speterson1011 is an unknown quantity at this point
Default Blower Motor

Ok so I just replaced my fan clutch because it was broke come to find out and my engine has been running hot for the last week now. Finally figured it out glad it was simple. and a quick 50 buck change out. My a/c problem of blowing cold to cool is now fixed because of fixing the fan clutch. Although it's still not blowing as hard as it used to about 20k miles ago. The blower motor up by the passenger dash has made a few whining and ticking noises for the past 2 weeks every now and then. I'm going to change it out. I'm hoping that is what it is. I have replaced the resistor and no difference so I'm hoping that is it. Anyone ran into this problem or think it could be something else? Thanks in advanced
 

Last edited by speterson1011; 09-26-2010 at 12:56 PM.
  #2  
Old 09-26-2010, 08:01 PM
MLRS327's Avatar
Beginning Member
Join Date: Sep 2010
Posts: 48
MLRS327 is on a distinguished road
Default

I can think of one thing. Turn the truck on max a/c. Feel if there is any air blowing to the defroster or floor vents. If there is air felt everywhere it's the mode door.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
maxvamp
Lighting & Electrical
3
10-31-2020 08:19 AM
SWATPARAMEDIC
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
0
01-01-2010 03:12 PM
highlife756
2nd Generation S-series (1995-2005) Tech
6
11-16-2009 03:57 PM
Booztd
General Tech Help
1
11-27-2006 10:17 AM
mike1of3
General Tech Help
4
10-12-2006 01:30 AM



Quick Reply: Blower Motor



All times are GMT -5. The time now is 04:35 PM.