Blower motor replacement
Thread Starter
|
Starting Member
Joined: Jan 2011
Posts: 1
Blower motor replacement
Hey all, I am a first time poster and have read a lot of posts regarding the blower motors on '97 Blazers. I am in the process of replacing the blower and wondered what would happen if I didn't close up the air box where I cut it open? This job is a pain in the rear and I would like to finish it as soon as I can. Please advise. Thanks in advance.
BF Guru
Joined: Sep 2009
Posts: 5,143
From: GTA, Ontario, CANADA
arew you asking what would be the consequences for not replacing the rubber membrane that you had to cut?
not to bloddy much.
but you can use some automotive "goop" to hold the pieces back on if you're overly concerned about it being open.
not to bloddy much.
but you can use some automotive "goop" to hold the pieces back on if you're overly concerned about it being open.
Thread
Thread Starter
Forum
Replies
Last Post
maxvamp
Lighting & Electrical
3
Oct 31, 2020 08:19 AM
SWATPARAMEDIC
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
0
Jan 1, 2010 03:12 PM
highlife756
2nd Generation S-series (1995-2005) Tech
6
Nov 16, 2009 03:57 PM
