Drivers power window "shudder"
#1
![Question](https://blazerforum.com/forum/images/icons/icon5.gif)
Hi,
Before I go tearing the door apart, can anyone tell me how to adjust the power window glass in the drivers door? (mine is RHD) When I close the window it works OK but for the last 6 inches or so it shudders as it closes, almost like it's binding on something. I have cleaned out the channels that the glass runs in & even tried some silicone spray in them to try & lubricate things but it has made no difference. If I put slight pressure on the top of the glass as it closes it runs smoothly.
Upon examining the window more closely, it appears that the drivers side glass is slightly crooked in the frame compared to the passenger side. All other windows open & close smoothly.
Any advice would be appreciated as i'm concerned that it might be putting too much strain on the motor & mechanism.
Before I go tearing the door apart, can anyone tell me how to adjust the power window glass in the drivers door? (mine is RHD) When I close the window it works OK but for the last 6 inches or so it shudders as it closes, almost like it's binding on something. I have cleaned out the channels that the glass runs in & even tried some silicone spray in them to try & lubricate things but it has made no difference. If I put slight pressure on the top of the glass as it closes it runs smoothly.
Upon examining the window more closely, it appears that the drivers side glass is slightly crooked in the frame compared to the passenger side. All other windows open & close smoothly.
Any advice would be appreciated as i'm concerned that it might be putting too much strain on the motor & mechanism.
Thread
Thread Starter
Forum
Replies
Last Post
Valafar
1st Generation S-series (1983-1994) Tech
5
03-30-2009 07:49 AM
gmaltese
2nd Generation S-series (1995-2005) Tech
4
05-12-2007 09:55 PM
hillbillyinOhio
General Tech Help
9
07-12-2006 04:18 AM