2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

Hesitation/sputter when flooring the blazer

Old Jun 5, 2013 | 05:20 PM
  #1  
thibault116's Avatar
Thread Starter
|
Beginning Member
Joined: Feb 2013
Posts: 38
From: Canada,Ontario
thibault116 is on a distinguished road
Question Hesitation/sputter when flooring the blazer

hey i have a 01 Chevy blazer iv done intake gasket,egr tube ,plugs, distributer cap and router, fuel filter,plugs cleaned throttle body and maf then i had po155 code so i did a o2 sensor bank 2 sensor 1 i think that's what po155 code is. hoping it would fix it. the fuel filter stoped it from sputtering and hesitating until i filled the tank again i thought it was bad gas. the blazer still hesitates and sputters at wot or under a load. idles fine runs good starts right up last time i checked the fuel pressure it was fine (2 months ago) i dont know what else to do its driving me nuts. if someone could help me out it would be greatly appreciated thanks for your time.
 
Old Sep 22, 2013 | 01:36 AM
  #2  
Wild_Thing XI's Avatar
Beginning Member
Joined: Sep 2013
Posts: 32
From: Grove City,Minnesota
Wild_Thing XI is on a distinguished road
Default

I have a similar problem with my 99. My friend hooked his diagnostic computer to it and it showed that the Fuel Tank Pressure Sensor was showing a code. Im trying to find anyone else that has dealt with this as well so I know how much it costs and where it is. I hope this kind of helps,lol.
 
Old Sep 22, 2013 | 03:35 AM
  #3  
HcHawks09's Avatar
Starting Member
Joined: Sep 2009
Posts: 243
From: St. Louis, Missouri
HcHawks09 is on a distinguished road
Default

Sounds like Throttle Position Sensor (TPS)
When you press the gas pedal the needle in the TPS moves, sending a signal to the computer to send more fuel to the engine. If the TPS goes bad there will be a dead spot(s) and when the needle hits that dead spot the computer will starve your engine of fuel causing the sputter/bog.
 
Old Sep 23, 2013 | 04:18 AM
  #4  
Wild_Thing XI's Avatar
Beginning Member
Joined: Sep 2013
Posts: 32
From: Grove City,Minnesota
Wild_Thing XI is on a distinguished road
Default

Wouldn't that show up on the computer? I am not doubting you, just saying if it were the problem I think it would show up on the diagnostic. I can live with it for the time being but it is something I will surely fix in the coming months.
 
Old Sep 24, 2013 | 06:58 AM
  #5  
xillzxnickx's Avatar
Starting Member
Joined: Jan 2011
Posts: 184
From: long island, new york
xillzxnickx is an unknown quantity at this point
Default

Spider injectors might be going bad

If you know how to do a injector balance test
 
Old Sep 24, 2013 | 11:38 AM
  #6  
burned's Avatar
Junior Member
Joined: Apr 2012
Posts: 368
From: Vancouver, BC, Canada
burned is on a distinguished road
Default

Originally Posted by thibault116
hey i have a 01 Chevy blazer iv done intake gasket,egr tube ,plugs, distributer cap and router, fuel filter,plugs cleaned throttle body and maf then i had po155 code so i did a o2 sensor bank 2 sensor 1 i think that's what po155 code is. hoping it would fix it. the fuel filter stoped it from sputtering and hesitating until i filled the tank again i thought it was bad gas. the blazer still hesitates and sputters at wot or under a load. idles fine runs good starts right up last time i checked the fuel pressure it was fine (2 months ago) i dont know what else to do its driving me nuts. if someone could help me out it would be greatly appreciated thanks for your time.
Any codes? Does the CEL flash when under load or WOT?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lilwhite219
Engine & Transmission
1
Apr 28, 2013 09:53 PM
foreveryoung
Engine & Transmission
9
Jun 28, 2011 11:13 PM
lush1_79
2nd Generation S-series (1995-2005) Tech
5
Apr 20, 2011 09:05 PM
blazeric
1st Generation S-series (1983-1994) Tech
23
Apr 13, 2009 08:01 AM
XBlazer01
Audio/Video Electronics
9
Aug 17, 2006 11:42 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:44 AM.