Perfect example of "inspect what you expect". And, just because it's new, doesn't mean it's good.


Better be AC Delco plugs, cap & rotor About a pea sized goober of dielectric in each boot, (both ends of the wires) and a dab on each terminal on the inside of the cap. Make sure the boots stay on. When you push the boots on, the grease creates a seal, and it tends to build up pressure and pop off. I usually run a real small screwdriver, or a pick, around the boot to relieve the pressure, and "burp" each boot Bottom line, use the dielectric generously.

 

we need to make a copy of MR hook just in case we loose this one.....lol he is just to valuable....