passenger seat prob
#1
04-12-2011 | 07:36 AM
Thread Starter
|
Beginning Member
Joined: Mar 2011
Posts: 32
passenger seat prob
after being released to be brought forward to let ppl get into my back seat on my 2003 2 door, it will not 'click/lock' back into place unless forcefully pushed back all the way. then works fine.
why??
thanks
why??
thanks
#2
04-15-2011 | 03:03 AM
Thread Starter
|
Beginning Member
Joined: Mar 2011
Posts: 32
...........sooo no suggestions??
#3
04-15-2011 | 07:21 AM
The section you posted in might be the reason... People generally do not read through the builds section looking for people in need of help. 
*Moving to 2nd Gen Tech*
*Moving to 2nd Gen Tech*
#4
04-15-2011 | 07:58 AM
New Member
Joined: Mar 2011
Posts: 68
From: South Carolina
Does your seat look like this:
http://www.gmpartseast.com/diagrams/...-ts1673502.png
I would check for a loose or broken spring and maybe spray some silicone onto and into the release mechanism and go from there.
http://www.gmpartseast.com/diagrams/...-ts1673502.png
I would check for a loose or broken spring and maybe spray some silicone onto and into the release mechanism and go from there.
#5
04-15-2011 | 08:13 AM
Thread Starter
|
Beginning Member
Joined: Mar 2011
Posts: 32
oh really?? sorry.. i didn't notice that. thank you!
and yes it does
and yes it does
Last edited by avelate63; 04-15-2011 at 08:15 AM.
Thread
Thread Starter
Forum
Replies
Last Post
LSpoweredStepside
Engine & Transmission
0
09-30-2013 09:22 PM
skittr
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
2
01-08-2010 06:44 AM
streblo
2nd Generation S-series (1995-2005) Tech
7
09-27-2008 08:34 PM
Mapoftazifosho
2nd Generation S-series (1995-2005) Tech
5
01-02-2007 06:27 AM
