"Passlock replacement"
#1
"Passlock replacement"
I replaced the ignition housing w Passlock today, and new key lock cylinder. Did the 30 minute relearn try after the ign switch, (still no start) and the "security" light flashed for about 10 minutes each time;then steady, then out. After housing and key lock replacement, no flashing security light after 3-5 seconds when first turned to "On".
My question: Is the relearn necessary again if no flashing light?
My question: Is the relearn necessary again if no flashing light?
Thread
Thread Starter
Forum
Replies
Last Post
nitelife
2nd Generation S-series (1995-2005) Tech
5
03-31-2010 06:47 PM