Possibly Hydrolocked ?
#11
Problem solved.
I pulled the plenum off today and took a look at the regulator. From the passenger side, which is where I was at when I put it on, everything looked good. When I went around to the drivers side the retaining clip wasn't completely over the tab and was spread open far enough to let the regulator back out on that side. It cost me another gasket set and oil change for not double checking that in the first place. I greatly appreciate all of your input !! At least I cut two hours off my plenum removal/install this time ! Many thanks. Dale
Thread
Thread Starter
Forum
Replies
Last Post
live4liftin48
2nd Generation S-series (1995-2005) Tech
3
09-14-2013 03:51 PM
Kellen
2nd Generation S-series (1995-2005) Tech
6
10-27-2008 08:19 AM
Jhop16
1st Generation S-series (1983-1994) Tech
2
02-04-2006 10:39 PM
blazergirl15
1st Generation S-series (1983-1994) Tech
3
08-28-2005 11:17 PM