Power Locks not working
#1
Power Locks not working
My power locks arent working on my 96 blazer, when you hit the unlock button it works fine but when you hit the lock botton it just makes a slight click and doesnt lock. I have a low battey could that be it or is it wired in series and one has come unpluged?
#2
Sounds more like your lock mechanism has just gotten sticky or your lock actuator has gotten weak. It is typical for one direction to actuate easier than the other.
#3
but none of the doors will lock so they are all sticky or is it because one doesnt work none work??
#4
Ok, that does change it a bit. Sounds like the RKE module is not sending out the proper voltage on the lock side of things. I am not sure if the earlier 2nd gens have the same setup as the newer ones, but I believe there is a lock and unlock relay...
#5
a ah i found the problem it was the relay it fried up so im getting a new one for $23. Thanks for the help!!
#6
what was the part number on the relay?
#7
the number is VBA-2016
#8
OE part number 88922752.
Thread
Thread Starter
Forum
Replies
Last Post
Jumpman227
Lighting & Electrical
0
09-29-2012 10:02 PM
knitter0217
Lighting & Electrical
16
03-19-2012 03:08 PM
Trip..
1st Generation S-series (1983-1994) Tech
3
11-16-2010 02:27 PM
beerguy
2nd Generation S-series (1995-2005) Tech
3
04-28-2009 10:12 PM