question about front axle actuator
#1
question about front axle actuator
Hey guys,
My 4x4 was not engaging. I removed the battery and tray, The actuator was in good condition as well as the cable was moving freely.
Now when I manually compressed the actuator I can hear air coming out near the firewall. When the truck is off and I do this should I be hearing this or does that mean there is a vacuum leak?
My 4x4 was not engaging. I removed the battery and tray, The actuator was in good condition as well as the cable was moving freely.
Now when I manually compressed the actuator I can hear air coming out near the firewall. When the truck is off and I do this should I be hearing this or does that mean there is a vacuum leak?
#2
Guest
Posts: n/a
I did, if you have someone who can squeeze it and you stick your ear over there and track it. I took a piece of tube and connected it to the line, so I could move around and blow on it till I found the leak. It was were the line goes down by the distributor by the firewall on mine. New piece of line and a small hose barb fixed mine.
Thread
Thread Starter
Forum
Replies
Last Post
Bono4783
2nd Generation S-series (1995-2005) Tech
9
02-04-2014 01:10 PM
jnail
2nd Generation S-series (1995-2005) Tech
3
01-05-2013 01:55 AM
Cassera
2nd Generation S-series (1995-2005) Tech
8
07-18-2012 09:04 PM
19jimmy99
2nd Generation S-series (1995-2005) Tech
1
05-02-2009 08:42 PM