so after almost cutting the wires in the kick panel, I re-read the diagram and it obviously says to cut between the switch and the motor. This means that I have to cut the with in the DOOR itself. What a freaking project and a half. I have to go to work in an hour so this project will have to wait for another day.

 

Damn, I was hoping not to have to take the doors apart to install my alarm.

 

no, make the connection in the drivers kick. it will work as long as you get the correct sides as motor and switch.

 

there arent seperate wires for the motor and switch in the kicks. There is only a light blue wire (unlock) and black/white wire (lock). thats it. The realy has to be inbetween the switch that is in the door and the motor that is in the door.

 

i realize that. cut the wire in the kick panel, the side that goes to the door is switch, the side that goes to the car is motor. This aint my first rodeo

 

by motor, dont they mean the actual locking mechanism, not the car motor? Im just a bit confused.

 

actually, they are basically meaning the bcm. hook it up there, it will work.

 

OK I will try it. Thanks for the help!

 

How goes the battle?

 

the alarm is in and working. The mono amp is dying. Im going to send it in for repair. gotta love extended warranties!