Factory radio interface
#1
Thread Starter
Join Date: Feb 2010
Posts: 2

I have a 2004 Blazer. I have installed a new stereo and I installed a factory radio interface (Scosche gm200 from Walmart), but I am having nothing but trouble. It doesn't retain power before the doors open, and won't even stay on when the key is in ACC position. I have done everything Scosche tech support said to try and even tried a different model (Scosche gmlan2sr from Bestbuy). At this point, I just want to take it out, and go without it. However, I have searched, and have been unable to find what specifically I will lose without it. I have seen reference to the door chimes and stock security. What stock security will I lose it I don't use it. Will the alarm no longer function? Also, what else will I lose without it.
Thanks for your help.
Wayne
Thanks for your help.
Wayne
#2
I have installed a new stereo
did you install it ?
#3
Thread Starter
Join Date: Feb 2010
Posts: 2

I installed it. Only the head unit, and the factory radio interface unit. I used the wire harness that came with the interface unit.
Thread
Thread Starter
Forum
Replies
Last Post
02Goldie_Loks
Tires and Wheels
2
08-11-2015 06:49 PM
Boiler20
Lighting & Electrical
0
10-19-2013 03:53 PM
1998LS
Engine & Transmission
2
06-11-2009 05:22 PM






