Help With Amplifier Installation
#11
05-06-2013 | 09:35 AM
Thread Starter
|
Beginning Member
Joined: Oct 2012
Posts: 26
From: SE WI, NE IL
Dual XPA2500 300 Watt Amplifier
sorry, just copy and pasted. its a 2 channel. has high and low inputs, want to use with factory HU, so I'm going with the high end inputs. wiring the power cables and ground cables are no problem. really just the remote turn on and what to do with that ground out of the high end plug at the amp.
sorry about all the questions, I just want to make sure I do it right the first time.
sorry, just copy and pasted. its a 2 channel. has high and low inputs, want to use with factory HU, so I'm going with the high end inputs. wiring the power cables and ground cables are no problem. really just the remote turn on and what to do with that ground out of the high end plug at the amp.
sorry about all the questions, I just want to make sure I do it right the first time.
#12
05-06-2013 | 11:01 AM
Senior Member
Joined: Jun 2011
Posts: 640
From: Northern Maine
according to the manual the ground on the input may not be necessary, just connect the 4 input wires accordingly. (link to install manual http://www.dualav.com/support/manuals/xpa08.pdf )
Thread
Thread Starter
Forum
Replies
Last Post
