The harness plugs into the back of the deck and supplies all the wires. You'd have to remove the dash and check but you pretty much have to do that anyway

 

Thanks, I'll have to do what I assumed I would have to do, find someone who knows how to help me lol I feel I would cause more damage than good.

 

it's not that bad...give it a shot...just don't forget the two screws on the left side of the dash, you have to remove the drivers side kick panel under the steering column to see these two bolts.
Also don't forget the screw in the top of the gauge cluster area.

Good Luck

Post back

 

Yea it's not bad at all. Get on YouTube and you could probably find a video with step by step directions.