I'm about put some tweeters in my a-pillar i was just cut a hole out and drop themin but i want to look professional and any suggestions how to make some MDF tweeters rings
http://www.partsexpress.com/pe/showd...number=267-748i using these because theyswivel and cheap

 

the professional look would be just to cut a hole and mount them flush in the tweeter cup they come in.

 

so the depth wont be an issue

 

depends how deep the tweeter is. Ive never taked the pillar off of my bllazer so I have no idea how much foor there is. If depth is an issue, just cut a tweeter cup out of MDF and glass over it for a smooth finish. Wrap it in your material of choice and call it a day.