Bush build transformation
#11
Where did you purchase your body lift from?
Wondering what people think of my rig, engine is stock. This is the first vehicle Ive owned and got it when I was 19, Im 22 now and im proud of what ive got done with my own hands and money.
done 90% of the work myself, usually only go to shops if I dont have the right equipment.
Also a lotta guys talk down on running 33s on our blazers so i thought Id show mine.
1995 4x4 LS Automatic. 261xxx KM
replaced all front end steering with all MOOG parts(balljoints, tie rod etc)
SKF wheel bearings/hub assemblies all around
SKF U joints all around
Leafsprings re arched and add a leaf installed
Guy I bought it from said someone swapped in a non stock 1.75 inch axle and 3.42 rear diff, never really looked into it but I do have the 7 5/8 rear end cause of the shape of the diff cover, looking into lockers but detroit doesnt make them for 7 5/8 rear end so not sure on that.
RC 2.5 suspension lift
PA 2inch body lift
15x8 x 5 1/4inch backspacing wheels (either Gragars or knock off Gragars)
33x10.5x15 General Grabber X3
Affordable offroad S10 winch bumper, bedlined by Rhino Linings
9500 lb smitty built winch
Amazon roof rack
Alpina 18 inch lightbar (Canadian tire)
rear bumper is currently deleted while i build a tube one lol
Minor fender trimming. Tires still rub on frame at full turn, cant do much about that.
mightve forgot some things but oh well heres before and after.
thanks for having a look, suggestions welcome.
done 90% of the work myself, usually only go to shops if I dont have the right equipment.
Also a lotta guys talk down on running 33s on our blazers so i thought Id show mine.
1995 4x4 LS Automatic. 261xxx KM
replaced all front end steering with all MOOG parts(balljoints, tie rod etc)
SKF wheel bearings/hub assemblies all around
SKF U joints all around
Leafsprings re arched and add a leaf installed
Guy I bought it from said someone swapped in a non stock 1.75 inch axle and 3.42 rear diff, never really looked into it but I do have the 7 5/8 rear end cause of the shape of the diff cover, looking into lockers but detroit doesnt make them for 7 5/8 rear end so not sure on that.
RC 2.5 suspension lift
PA 2inch body lift
15x8 x 5 1/4inch backspacing wheels (either Gragars or knock off Gragars)
33x10.5x15 General Grabber X3
Affordable offroad S10 winch bumper, bedlined by Rhino Linings
9500 lb smitty built winch
Amazon roof rack
Alpina 18 inch lightbar (Canadian tire)
rear bumper is currently deleted while i build a tube one lol
Minor fender trimming. Tires still rub on frame at full turn, cant do much about that.
mightve forgot some things but oh well heres before and after.
thanks for having a look, suggestions welcome.
Thread
Thread Starter
Forum
Replies
Last Post