and this is how it currently sits, I used stock springs in rear with a 3" add-a-leaf. The rear is currently ~ 1.5" - 2" higher than the front. I can play around with the leaf pack or remove the longer shackles I have in the rear and put the stock ones back in.

I need to figure out what shocks I'm gonna run.

Need to figure out my steering setup, I have a reverse astro box laying around and there's some obvious binding issues that will happen. I think I'll have to go hi steer regardless.

Gotta take a look at drive shafts and pinion angles. I'm hoping the exhaust won't be an issue here.



I've done a lot of reading, but this is my first SAS project and I know my work isn't perfect. I'm looking for constructive criticism or tips, thanks for reading so far.

 

Looking really good

 

Now the only thing missing is a nice mudpit to get it dirty

 

Nice progress!