fuel pressure
#1
fuel pressure
I am putting a new engine in my S10 4 x 4. I had a 1984 2.8 V6 in it and I found a good 1988 2.8 V6. The problem I have is my old one was had a carburator so I changed this one over to a carburator so I wouldn't have to get a new computer, etc. There is no place for a fuel pump on the block so the guy at Advance Auto parts sold me a electric fuel pump but I don't know what to set the fuel pump pressure to. Can anybody help me out? Thanks
#2
RE: fuel pressure
It should be between 9 and 13 PSI..I'd set it at 10 and see how it goes.
#3
RE: fuel pressure
Thanks for the help!
#4
RE: fuel pressure
No problem, keep us posted.
Thread
Thread Starter
Forum
Replies
Last Post
brianroark
Engine & Transmission
3
06-25-2010 03:14 PM
Spartan66
2nd Generation S-series (1995-2005) Tech
6
07-11-2008 02:34 PM
riverjamie
Engine & Transmission
5
09-24-2007 08:21 PM
aspenpup
2nd Generation S-series (1995-2005) Tech
1
09-09-2007 07:11 PM
jlinder
2nd Generation S-series (1995-2005) Tech
1
08-21-2005 11:08 AM