Another vacuum question
#1
Starting Member
Thread Starter
Join Date: Jul 2006
Location:
Posts: 131

OK I have a pretty good handle on the vacuum system of my 95 4.3 blazer 4x4.... there's one line I'm not posative of and just want to confirm... there's the main feed comin' off my intake... goes to the check valve then off to a T the main line comes across the firewall inside a case with a couple wire bundles and over behind my brake master cyl. now there's another line that comes across the firewall in that bundle of wires one end goes behind the master cyl. on one of the T's in there.. .the other end goes to about mid firewall then runs down under the vehicle and back underneath it and disappears... I haven't crawled under there yet to trace it down but is this the line to the transfer case???
#2
BF Veteran
Join Date: May 2005
Location: Central Illinois
Posts: 3,891











Yes, It provides vacuum to the t-case.
Thread
Thread Starter
Forum
Replies
Last Post
cjb2145
2nd Generation S-series (1995-2005) Tech
18
10-06-2018 04:46 PM
TennesseeBoy
1st Generation S-series (1983-1994) Tech
4
11-06-2013 05:16 AM
rntbuck
2nd Generation S-series (1995-2005) Tech
13
07-25-2012 01:24 PM
oisinirish
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
4
06-13-2011 07:37 AM
chrishorton74
2nd Generation S-series (1995-2005) Tech
3
06-02-2010 09:03 PM





