Torsion bar/ Shackles pros/cons?
tbar crank is up to you.
you need to measure each side while on level ground and compare.
then adjust appropriately. it takes about 20 min.
search the diy section. its all in there. there is one bolt per side.
the thread tells you what each crank equals and how to lift vehicle to do this.
and get an alignment afterwords.
you need to measure each side while on level ground and compare.
then adjust appropriately. it takes about 20 min.
search the diy section. its all in there. there is one bolt per side.
the thread tells you what each crank equals and how to lift vehicle to do this.
and get an alignment afterwords.
Thread
Thread Starter
Forum
Replies
Last Post
taba5
Audio/Video Electronics
18
Jun 14, 2010 06:27 PM
