No headlights after motor swap?!?
#1
No headlights after motor swap?!?
So here is the deal, I've been dealing with a failed motor swap. My buddy has a shop and had one of his new guys test out his skills on my blazer. He failed. We finally got the new motor in but I don't have high or low beams everything else works tho. I checked the bulbs the fuses on the inside of the truck but I get nothing. Before I go out and fiddle with it I just wanted to know what your guesses were as to what's going on. Thanks for the input.
#5
wasnt the headlights in that year + grounded by the BCM? I might be mistaken.....
#6
Okay, so I checked and there is a ground right by where the harness connects to the headlight on both ends and they were nice n clean n tight. I can recheck fuses. I did notice that the passenger DTRL was clipped would that cause an issue? Keep in mind this is low beam and high beam on both sides and no dtrl either.
Thread
Thread Starter
Forum
Replies
Last Post
Daniel Wood
Engine & Transmission
5
03-17-2014 04:05 PM
Charlie99
2nd Generation S-series (1995-2005) Tech
8
07-10-2013 07:02 PM
hollywoodgrad
New Member Area
0
01-25-2012 01:58 PM