'05 Silverado
#1
'05 Silverado
Not sure where to place this. I know it's not a Blazer but it is a tech question.
'05 Silverado 1/2 ton, 4X4. 4.8 liter.
The service airbag light came on briefly a week or to ago and I wiggled the ignition switch it went back off. Now it's stuck on.
1) I unplugged the sensors in the seats and cleaned the connector and reconnected. No good.
2) I removed the plastic cowling on the steering column and cleaned everything I could see in there. No Good.
3) Horn works.
4) Autozone reader will not get a code.
Any idears?
'05 Silverado 1/2 ton, 4X4. 4.8 liter.
The service airbag light came on briefly a week or to ago and I wiggled the ignition switch it went back off. Now it's stuck on.
1) I unplugged the sensors in the seats and cleaned the connector and reconnected. No good.
2) I removed the plastic cowling on the steering column and cleaned everything I could see in there. No Good.
3) Horn works.
4) Autozone reader will not get a code.
Any idears?
#2
You have to get it scanned by a full feature scan tool that can access the ABS module (GM Tech2 or equivalent). If you were closer, I would do it with my AutoEnginuity scanner.
#3
Aahh. The dealer it is then. It's on the company dime.
#4
#5
The poor thing. It's an '05. 116,000+ miles. Probably 1/3 of em off road. And I "mean" OFF ROAD. Has lasted pretty good though for the abuse it gets. No major issues.
Thread
Thread Starter
Forum
Replies
Last Post