4x4 problems on 97 S-10 Blazer
#1
4x4 problems on 97 S-10 Blazer
My 4HI is not working on my 97 Chevy Blazer. When driving,if I push the 4HI button on my electronic transfer case nothing happens. If I put it into neutral, I'm able to go from 2HI to 4LO and back, but when I push the 4HI when in neutral both 4HI and 4LO buttons blink several times before going back to 2HI. I'm not a mechanic by any means but any suggestions would be greatly appreciated.
#2
RE: 4x4 problems on 97 S-10 Blazer
I don't know if this will help, but here's a post by lastcoupe from the DIY section
#3
RE: 4x4 problems on 97 S-10 Blazer
It turned out to be a bad transfer case encoder motor. Once I replaced, the 4 wheel drive is working normal again.
Thread
Thread Starter
Forum
Replies
Last Post
tdbone1
2nd Generation S-series (1995-2005) Tech
15
11-30-2012 06:53 PM
upblazer95
2nd Generation S-series (1995-2005) Tech
3
04-04-2009 08:27 PM