Steering, Suspension & Drivetrain Questions about your steering, suspension, axles, and/or transfer case? Post up here.

Sliping while turning slow

Thread Tools
 
Search this Thread
 
  #1  
Old 05-18-2012, 04:17 AM
Culpy's Avatar
New Member
Thread Starter
Join Date: May 2012
Location: ontario
Posts: 3
Culpy is on a distinguished road
Default Sliping while turning slow

Have a 05 zr2 blazer.
Seem there is a slipping or slidding feeling when wheel turned completely and moving slow turning into parking stall and my 4x4 is Not ingaged its a pretty weird feeling.(totally different from the 4x4 turning feeling) Does anyone have any suggestions on what would be causing this feeling?
 

Last edited by Culpy; 05-18-2012 at 05:24 AM.
  #2  
Old 05-21-2012, 03:56 PM
Ogre762's Avatar
Beginning Member
Join Date: Dec 2011
Location: Dayton, OH
Posts: 17
Ogre762 is on a distinguished road
Default

Wheel alignment? If one tire is toe' d in more than the other while turning, you'll feel a scrubbing. It honestly could be a lot of different things, worn bushings, wheel bearings, etc. I'd give everything in the front and rear a good shake down and make sure you don't have any bushings or balljoints wearing out.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
coolcat0285
Engine & Transmission
0
10-15-2012 05:43 AM
jbchevy3
Engine & Transmission
4
04-10-2012 07:01 PM
EnyChevyUK
Steering, Suspension & Drivetrain
3
04-22-2009 04:32 PM
jeepster82
2nd Generation S-series (1995-2005) Tech
6
02-01-2009 02:13 PM
Jimmysls98
Engine & Transmission
8
02-28-2007 10:40 PM



Quick Reply: Sliping while turning slow



All times are GMT -5. The time now is 05:55 PM.