upper ball joints
#1
upper ball joints
so i know this is probably an old question but i am changing my upper ball joints again....2 mnths after replacement. I am running about a 2 inch lift stressing the uppers horribly. The question is can i do the ball joint flip without spacers or will i have to modify to get the ball joints to mount up flat to the oe arms. Thanks.
#2
so i know this is probably an old question but i am changing my upper ball joints again....2 mnths after replacement. I am running about a 2 inch lift stressing the uppers horribly. The question is can i do the ball joint flip without spacers or will i have to modify to get the ball joints to mount up flat to the oe arms. Thanks.
If the ball-joint flip doesn't work you could install the Rough Country upper control arms. This is what I did for my lift.
#3
420 canadian after taxes new. Ask me how I know lol...
I'm curious about this flip. I've just started to hear about it.
are the ball joint locations slightly off center? Will that effect it any?
Edit: they deliver to a store close by, I can get the info if you go that route.
I'm curious about this flip. I've just started to hear about it.
are the ball joint locations slightly off center? Will that effect it any?
Edit: they deliver to a store close by, I can get the info if you go that route.
Thread
Thread Starter
Forum
Replies
Last Post