What im wondering if 31/10.50/15 BFG A/T's or M/T's will fit on my 99 2 door with an add a leaf and a torsion bar crank. I would like there to be no rubing on the fenders. Rubing at full lock is ok. I would like to know how theses will fit on my stock ZR2 wheels and on aftermarket wheel with a 4.5" backspacing

 

add a leaf and torsion crank is not enough info for anyone to decide if you're tires will fit. We need a lift measurement.

To put you in the ball park...my 30x10.50s (on 15x8s with 4.5' of backspacing) rub on fender at the last 10% to full lock, and thats with 1.5' up and trimmed fenders.

 

your stock ZR2 wheels? im assuming you have ZR2 wheels on a non ZR2?? if it is a ZR2 you will be able to fit them with no mods. If it is a non-ZR2 you need 2 inches of all around lift and 5-6" backspacing. They may still rub the frame at full crank..

 

Aaron where ya been?!?!? Havn't seen you around here in a while...had lots of 'wow a_tack would explain this better' threads recently

 

i have a non-ZR2 with ZR2 wheels and whould 4.5" backspacing work i want them to stick out like the ZR2

 

theyre gonna rub with 4.5" BS... unless you trim the fenders a bit..

and wolfpack, i've been lurking around..lol in between jobs right now so i've been out doing yard work for extra cash.... by the time I can get online im too tired...haha but im back..

 

will they rub with the add a leaf torsion crank and a 2" body lift?

 

well no... but thats kindof a waste just for 31's... why not just the crank, shackles, and stock rim backspacing with 31's?

 

Well he wants the ZR2 stance...hence the lower backspace rims. 4.5' is manageable...I've only gone up 1.5' and only had a trim a minor bit, but then again that's with 30x10.50s not 31s.....


Haha...again..let's just go with a_tack on this one

 

will 32's fit with a torsion crank, aal, and a body lift