Blazer Forum - Chevy Blazer Forums
0 2018/03/31 23:04:09
1999 Auto HVAC Schematic
1999 Auto HVAC Schematic
0 2018/03/31 23:07:17
1999 Auto HVAC Schematic
1999 Auto HVAC Schematic
0 2018/03/31 23:07:58
0 2018/04/01 10:12:13
0 2018/04/01 21:26:04
0 2018/04/06 23:32:34
Blower motor out and the temperature control module removed
Blower motor out and the temperature control module removed
2 2018/04/16 09:58:41
The needles pulled out from the blower motor cavity
The needles pulled out from the blower motor cavity
0 2018/04/16 09:59:11
My 1968 Mustang. One family car, originally a 2v-289, now 4v-289 with dual exhaust. AT, PS, no-AC.
My 1968 Mustang. One family car, originally a 2v-289, now 4v-289 with dual exhaust. AT, PS, no-AC.
0 2018/04/27 14:08:23
0 2018/06/24 10:34:53
0 2018/06/24 10:35:06
0 2018/06/24 10:35:16
Older design on left, newer on right.
Older design on left, newer on right.
0 2018/06/28 08:59:57
Older design on left, newer on right.
Older design on left, newer on right.
0 2018/06/28 09:00:12
2000 Vac diagram for HVAC system
2000 Vac diagram for HVAC system
0 2018/07/15 15:35:57
The access door is circled in red and the top of the evaporator is indicated in green. The view is looking back towards the fire-wall on the passenger side.
The access door is circled in red and the top of the evaporator is indicated in green. The view is looking back towards the fire-wall on the passenger side.
0 2018/07/17 09:32:14
Looking down into the access panel. The evaporator is on the left and the heater core is top center. The door is the vertical panel
Looking down into the access panel. The evaporator is on the left and the heater core is top center. The door is the vertical panel
0 2018/07/17 09:33:50
The evaporator is on the left and the heater core is in the upper center part of the picture. The blend door is identified with the cyan arrow and the pivot axle for the blend door is identified with the yellow line.
The evaporator is on the left and the heater core is in the upper center part of the picture. The blend door is identified with the cyan arrow and the pivot axle for the blend door is identified with the yellow line.
0 2018/07/17 09:35:50
Top side facing camera, forward end to the left. Note the misplacement of the fitting for the O2 sensor.
Top side facing camera, forward end to the left. Note the misplacement of the fitting for the O2 sensor.
0 2018/07/19 12:27:09
0 2018/07/19 15:14:33
Underside of cats; new on left, old on right. Note how the O2 sensor needs to come out of the pipe to the side.
Underside of cats; new on left, old on right. Note how the O2 sensor needs to come out of the pipe to the side.
0 2018/07/26 10:57:58
Muffler end view showing the incorrect placement of the bung for the O2 sensor on the new cat converter (on left).
Muffler end view showing the incorrect placement of the bung for the O2 sensor on the new cat converter (on left).
0 2018/07/26 10:59:13
Top view of converters showing the incorrect placement of the bung for the O2 sensor on the Ultra Exhaust converter that would prevent the converter from being installed if the O2 sensor were in place.
Top view of converters showing the incorrect placement of the bung for the O2 sensor on the Ultra Exhaust converter that would prevent the converter from being installed if the O2 sensor were in place.
0 2018/07/26 10:59:18
0 2018/08/10 13:03:49
0 2018/08/10 13:04:09
0 2018/08/10 13:04:35
0 2018/08/10 13:05:05
0 2018/08/10 13:05:35
0 2018/08/10 13:05:53
0 2018/08/10 13:06:17
0 2018/08/10 13:06:49
0 2018/08/10 13:07:11
Vasture brand. Only one I could find on eBay that had an anodized finish
Vasture brand. Only one I could find on eBay that had an anodized finish
0 2018/08/11 15:16:22
Berfore
Berfore
0 2018/08/11 15:16:41
Installed on the wheel. Spacer centered on axle hub and wheel centered on spacer hub nicely.
Installed on the wheel. Spacer centered on axle hub and wheel centered on spacer hub nicely.
0 2018/08/11 15:17:05
Got 8.5 full turns of the nut on the stud. Otherwise studs and nuts just a bit recessed in the spacer.
Got 8.5 full turns of the nut on the stud. Otherwise studs and nuts just a bit recessed in the spacer.
0 2018/08/11 15:17:20
After
After
0 2018/08/11 15:17:36
Before
Before
0 2018/08/12 10:19:50
After
After
0 2018/08/12 10:20:06
Looking forward
Looking forward
0 2018/08/12 18:39:42