2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

Possible hood release cable broken

Thread Tools
 
Search this Thread
 
  #1  
Old 01-31-2014, 06:04 PM
runningoec's Avatar
Starting Member
Thread Starter
Join Date: Jan 2014
Posts: 1
runningoec is on a distinguished road
Default Possible hood release cable broken

I have a 1997 Blazer. The hood release cable is not being pulled back in to the latch mechanism. I believe that the cable either slipped off or it broke. The cable is still resisting me from pulling too hard though. I need help on how to open my hood manually from outside the car. If you need pictures I can take some to show what is happening.
 
  #2  
Old 01-31-2014, 06:27 PM
metalmeltr's Avatar
New Member
Join Date: Sep 2013
Location: Western Ohio
Posts: 79
metalmeltr is on a distinguished road
Default

I would have to go look at mine, but i think you can reach up through the grill with a u joint, socket and an extension. Believe it is a 13mm. First try pushing down on the hood first and having someone pull the handle, when the pull the handle pull up on the hood. These latches get sticky and difficult to release which causes broken cables. I would suggest frequent lubrication
 
  #3  
Old 01-31-2014, 08:15 PM
canuck blazer's Avatar
Starting Member
Join Date: Mar 2013
Location: ottawa ontario canada
Posts: 162
canuck blazer is on a distinguished road
Default

tap the hood on the passenger side right corner do it a few times and you hood should bounce open, this is what I have to do every so often
 
  #4  
Old 03-18-2014, 02:57 PM
Brent Krause's Avatar
Starting Member
Join Date: Mar 2014
Posts: 2
Brent Krause is on a distinguished road
Default

If there is still resistance than most likely the spring that pulls it back is either warn or broken. Same thing happened to mine.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sprbld417
1st Generation S-series (1983-1994) Tech
4
04-25-2011 07:28 PM
DAVE SR
2nd Generation S-series (1995-2005) Tech
4
11-07-2010 03:10 PM
tmitbyh
1st Generation S-series (1983-1994) Tech
5
10-13-2009 08:01 AM
blazer4x4
2nd Generation S-series (1995-2005) Tech
1
09-12-2007 11:59 AM
Hanr3
2nd Generation S-series (1995-2005) Tech
9
01-22-2007 02:30 AM



Quick Reply: Possible hood release cable broken



All times are GMT -5. The time now is 09:23 PM.