98 4 door, I blew out another brake line driver side front. . It looks like it comes from the rubber line then up.
does this go to master cylinder or a proportionary valve. Also is this easy to get to and do ?
itsprayed on my exhaust and steering column, smoked a bit.

thank you

 

Follow the trace and You'll find out. Be advised to keep up Your brake fluid tank full. The system is most likely gravity bleeding and if the air gets into Your ABS unit, You're in a big trouble. If You want to remake a new pipes, use copper-nickel material.

 

Thanks for the info.

 

I replaced the line, dont know if the thing ran dry requiring automated bleed which I have no idea what scan tool would do this.
Also my abs is non functioning, relay was removed because the first 5 or so stops would trigger the abs everytime it was started.

 

https://blazerforum.com/forum/2nd-ge...65/#post709471

 

Thank you