High flow Direct-fit Cat.
#1
New Member
Thread Starter
Join Date: Aug 2010
Posts: 74

so My catalytic converter is rattling around a lot and starting to annoy the hell out of me. SES light is NOT on.
Has anyone installed a high-flow direct-fit cat who could tell me if it's worth it? i was reading around on here and saw a lot of the universals were causing problems so im tryin to stay away from them.
Thanks in advance
- Mike
Has anyone installed a high-flow direct-fit cat who could tell me if it's worth it? i was reading around on here and saw a lot of the universals were causing problems so im tryin to stay away from them.
Thanks in advance
- Mike
#3
Senior Member
Join Date: Mar 2008
Posts: 975

#4
Starting Member
Join Date: Nov 2008
Location:
Posts: 221

Mine rattles like you said but no ses code. I even pulled the heat sheild off and it still annoys the crap out of me.
#5
New Member
Thread Starter
Join Date: Aug 2010
Posts: 74

installed the magnaflow cat 2 days ago. So far so good. huge difference from the stock =]
the rattle was cause by my cat being broken up inside.
the rattle was cause by my cat being broken up inside.
#7
Thread
Thread Starter
Forum
Replies
Last Post







