side post battery threads
#1
side post battery threads
The bolt on the + side terminal won't tighten. I keep thinking it's going to back itself out one day on I-45 rush hour.
I've been using a terminal extender and when I used it on a new battery it slips, and now it slips on the old battery too. Looking for a good fix!
I've been using a terminal extender and when I used it on a new battery it slips, and now it slips on the old battery too. Looking for a good fix!
Last edited by puttster; 10-04-2024 at 09:59 PM.
#2
They are 38" NC, cut into lead - and if they have been overtightened, they strip out, and the threaded parts can constantly fall out.
Been there --- done it.
I think the correct torque is 11in/lbs., but if not --- it's very low.
Been there --- done it.
I think the correct torque is 11in/lbs., but if not --- it's very low.
Last edited by Bass_Surfer; Yesterday at 11:15 PM. Reason: added info
Thread
Thread Starter
Forum
Replies
Last Post
Arkie blazin
Lighting & Electrical
5
04-13-2019 12:09 PM