How to: Quad Beam Mod 2nd Gen - DISCUSSION THREAD
#61
03-03-2012, 03:51 PM
Originally Posted by Tony H
Only needed to do one side. no harm done.
#62
03-03-2012, 05:20 PM
Ok so for my 97 i have to follow the second set of instructions or can i follow the first set? im confused. I read the comments and it looks like the first set is only for the 98+?
#63
11-18-2012, 11:49 AM
A member messaged me and asked how I wired my 2000 Chevy Blazer with my HID kit. I made a video to show him. Here it is: https://www.youtube.com/watch?v=27IEk10InnM
This is how I wired it using a 12VDC 30/40A relay.
30 -- Blue - Low Beam Positive
85 -- White - High Beam Negative
86 -- Black - High Beam Positive
87 -- Yellow - Ground
In theory, it should work the same without the HID kit and you would just tap into the stock wires. Hope this helps.
This is how I wired it using a 12VDC 30/40A relay.
30 -- Blue - Low Beam Positive
85 -- White - High Beam Negative
86 -- Black - High Beam Positive
87 -- Yellow - Ground
In theory, it should work the same without the HID kit and you would just tap into the stock wires. Hope this helps.
#64
12-11-2012, 05:19 PM
Just curious will this work on an 92 k1500 ?
Edit: I might need to go with a relay system.
Edit: I might need to go with a relay system.
Last edited by xgiovannix12; 12-11-2012 at 06:11 PM.
#65
02-11-2013, 06:14 PM
Found this mod a little to late. I just bought the LMC relay kit. Went to put it on, and couldn't help but notice the wire colors on my 95 Jimmy were different. It says to splice the yellow and purple, and brown wire separately for the park lamps.
After reading through here, let me see if I have it right. I splice the Tan wire to the yellow, and the light green to the purple on the harness kit?
After reading through here, let me see if I have it right. I splice the Tan wire to the yellow, and the light green to the purple on the harness kit?
#66
05-12-2013, 01:12 PM
just did the yellow wire mod today,i only grounded the drivers side, here are some pics.
tapped in to the yellow wire
wire pulled through rad support and and attached to exsting ground
to make reinstalling the headlight easyer i cut the nubs off the back (see green circles)
low beam
hi beam
tapped in to the yellow wire
wire pulled through rad support and and attached to exsting ground
to make reinstalling the headlight easyer i cut the nubs off the back (see green circles)
low beam
hi beam
Last edited by Thager; 05-12-2013 at 02:02 PM. Reason: added pics
#69
09-19-2013, 09:20 AM
Originally Posted by Thager
update, it stopped working so i grounded both sides now and it works again
#70
09-19-2013, 10:56 AM
This is such an interesting thread to read as the UK model Blazer comes with the quad beam mod already installed.
I have checked both of my Blazers and I can have either the dip lights on, mean beam on or all four just by controlling the stalk on the steering column.
That's another differences I have found between the UK and US models.
I have checked both of my Blazers and I can have either the dip lights on, mean beam on or all four just by controlling the stalk on the steering column.
That's another differences I have found between the UK and US models.
