Double Din Install, Tonight! ?'s After searching....

Closed Thread Subscribe

Thread Tools

Search this Thread

Feb 27, 2011 | 02:20 AM

#31

BlazinClinton

Starting Member

Joined: Feb 2011

Posts: 195

From: Edmonton AB, Canada

BlazinClinton is on a distinguished road

Quote:

Originally Posted by 96jimmyslt4x4

What year do you have?

2000 with tach, though the housing would be the same im sure.

Feb 27, 2011 | 02:29 AM

#32

96jimmyslt4x4

Starting Member

Joined: Dec 2010

Posts: 239

96jimmyslt4x4 is on a distinguished road

Quote:

Originally Posted by BlazinClinton

2000 with tach, though the housing would be the same im sure.

post a picture?

it should just peel right off, it's only held in there with some snap on things or w/e they are called.

just gently pull back on the huge trim piece that is around the head unit.

Feb 27, 2011 | 01:57 PM

#33

JST4SHO

Thread Starter

Junior Member

Joined: Mar 2007

Posts: 340

From:

JST4SHO is an unknown quantity at this point

Once the dash trim is out, the cluster is held in with 4 bolts. It than has a harness on the back of it to be unplugged. The outer housing (what you see looking at the guages) snaps over the cluster and will give you access to theface plate and needles. Like I said bit involved.