Setting the gain
#11
01-14-2007 | 04:41 PM
Administrator
Joined: Nov 2005
Posts: 2,931
From: Zanesville oHIo
RE: Setting the gain
right click and hit savetarget as. or go to www.realmofexcursion and click on downloads tab and test tones are there.
#12
01-14-2007 | 05:01 PM
BF Veteran
Joined: Feb 2006
Posts: 3,333
From: Saskatoon, Canada
RE: Setting the gain
check out 'bass i love you' if you didnt already.......
people are pretty surprised when they hear that in my truck, not the loudest, but damn, do you get excursion!
people are pretty surprised when they hear that in my truck, not the loudest, but damn, do you get excursion!
#13
01-14-2007 | 06:10 PM
Thread Starter
Joined: Nov 2006
Posts: 612
From:
RE: Setting the gain
I got the file downloaded but when I burn it to a cd via WMP it says converted then complete and the disc pops out. I am worried it has converted it from a wav file to a wma or mp3 or somthing and if that happened I am not getting the quality I should be getting which would through off my gain setting. How would you burn it if you were doing this?
#14
01-14-2007 | 06:15 PM
Super Member
Joined: May 2006
Posts: 1,581
From: Van Isl, B.C.
RE: Setting the gain
If you can get it to play it your blazer it'll be just fine.
#15
01-14-2007 | 06:20 PM
Thread Starter
Joined: Nov 2006
Posts: 612
From:
RE: Setting the gain
I also downloaded the 50 hz test tone and burned it via WMP and it converted it automaticly (to what, I am not sure...) When I listened to the file after it was burned I could easily tell the quality loss after ti was burnt. So how do people burn these without loosing the quality?
#16
01-14-2007 | 08:19 PM
BF Veteran
Joined: Feb 2006
Posts: 3,333
From: Saskatoon, Canada
RE: Setting the gain
I believe mine goes to mp3........well on my moms comp, not this pos [:'(]
#17
01-14-2007 | 08:56 PM
Administrator
Joined: Nov 2005
Posts: 2,931
From: Zanesville oHIo
RE: Setting the gain
if you guys just make a data cd, using drag and drop in windows, it will burn as whatever you want it to.
#18
01-15-2007 | 12:10 PM
Thread Starter
Joined: Nov 2006
Posts: 612
From:
RE: Setting the gain
When I got my amp I got a paper that said that my amp is certified to 929 rms not the 750 on the box. Should I set my gain pertaining to the 929 rms or 750?
#19
01-15-2007 | 12:22 PM
Administrator
Joined: Nov 2005
Posts: 2,931
From: Zanesville oHIo
RE: Setting the gain
929. and the target voltage for that is 43.1. I hope thats not too much power for those subs. it might be.
#20
01-15-2007 | 01:00 PM
Thread Starter
Joined: Nov 2006
Posts: 612
From:
RE: Setting the gain
Ok well I just set it for 750 since I wasnt sure at the time. I set it with the HU volume at 28 then I turned it up one (29) and the volatage jumped up to 44. So my question is, will I be damaging anything if I play it above 28?
I downloaded "Bass I Love You" and played it after the settings were correct. The subs sound fine but I have my speakers at the following settings:
Low: -8
Mid: 3
Hi: -9
Yet when I play the song there are certain spots where I think what I am hearing is my speakers distort. Thing is, when they distort in the song its not playing any high notes from what I remember.
I downloaded "Bass I Love You" and played it after the settings were correct. The subs sound fine but I have my speakers at the following settings:
Low: -8
Mid: 3
Hi: -9
Yet when I play the song there are certain spots where I think what I am hearing is my speakers distort. Thing is, when they distort in the song its not playing any high notes from what I remember.