Madmaxxed's 1999 Chevy Blazer Slow Build!
Junior Member
Joined: Mar 2011
Posts: 445
From: Southeast Michigan
If I may ask what is your final ride height measurement after the alignment in the front? Also whered you get alignment done and did they give you any problems having done the lift? Sorry if I missed it but what tires you running in those pics?
Last edited by TMM217; Oct 15, 2015 at 01:58 PM.
Thread Starter
|
Starting Member
Joined: Sep 2011
Posts: 101
From: New Hampshire
I can grab some measurements tomorrow. I brought it to a small local shop, Lionel's Alignment. The older gentleman knew it was a project and had no issues, taking his time, making sure the front end was nice and tight before proceeding. I'm running a set of GT Adventurous AT3, 265/75/16.
Thread Starter
|
Starting Member
Joined: Sep 2011
Posts: 101
From: New Hampshire
I changed out all the fluids a few weeks back, F/R diffs, oil, transfer case. I had some time to weld in some metal to close up the cutting I had to do on the fenders. The driver side will require a bit more fabricating due to some body rust. All in all I'm happy with the passenger side. Maybe I can get to the other side this weekend.
Thread
Thread Starter
Forum
Replies
Last Post